Neutrik NC3MXX-HA - XLR
-
Neutrik NC3MXX-HA - XLR
The Neutrik NC3MXX-HA is a 3 pole male cable connector with nickel housing, silver contacts and crimp termination (standard B crimp).
Special version of the XLR cable connector XX Series with crimp terminals.
Key Benefits:
- Crimp termination with standard B-crimp tool (B-crimp acc. IEC 60352-2)
- Gastight and Solderless connection (RoHS compliant)
- Male connector with improved locking recess without “window”, more stringent housing increases durability
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Coloured rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
Connection type: XLR
Gender: male
Electrical
Capacitance between contacts: ≤ 4 pF
Contact resistance: ≤ 3 mΩ
Dielectric strength: 1.5 kVdc
Insulation resistance: > 10 GΩ (initial)
Rated current per contact: 1 A
Rated voltage: <50 V
Environmental
Flammability: UL 94 V-0
Standard compliance: IEC 61076-2-103
Protection class: IP 40
Solderability: Complies with IEC 68-2-20
Temperature range: -30 °C to +80 °C
Mechanical
Cable O.D.: 3.5 - 8.0 mm
Insertion force: ≤ 20 N
Withdrawal force: ≤ 20 N
Lifetime: > 1000 mating cycles
Wiresize: 0.22 - 0.34 mm², 24 - 22 AWG
Wiring: Crimp contacts
Locking device: Latch lock
Material
Boot: Polyurethan
Contact plating: 2 µm Ag
Contacts: Brass (CuZn39Pb3)
Insert: Polyamide (PA66)
Locking element: Zinc diecast (ZnAl4Cu1)
Shell: Zinc diecast (ZnAl4Cu1)
Shell plating: Nickel
Strain relief: Polyacetal (POM)