Neutrik NO2-4FDW-1-A DUO Panel Connectors (Earth Tag)

Neutrik NO2-4FDW-1-A is a chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*.

The chassis connector acts as a “feed-through” allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.

Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

Key Benefits:

• Suggested OEM equipment connector due to LC front compatibility
• Designed as feedthrough with automatic sealing shutter 
• Shutter with silicone gasket protects optical connection from dust and dirt 
• Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
• Accommodates standard LC connectors on the rear for simple installation 
• Connection on the front side either by rugged opticalCON or standard LC connector 
• The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations 
• IP65 ingress protection in mated condition with SCDP-*Colour coding with SCDP-* according to ANSI/TIA-568.3-D
• Standard: Multimode - black, Single mode PC - blue, Single mode APC - green