Sales line+44 (0)1844 202101
Lines open Mon-Fri 9am-5pm

Neutrik NBNC75BLP9X Rear Twist on BNC Plug

  • NBNC75BLP9X REAR TWIST ON BNC PLUG
    NBNC75BLP9X REAR TWIST ON BNC PLUG
Neutrik NBNC75BLP9X Rear Twist on BNC Plug
PN - BA-65-5129
£3.38(ex vat) / Each
Qty Price
1-4£3.38 (ex vat)
5-9£3.20 (ex vat)
10+£3.08 (ex vat)

The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.

Optimised Return Loss
Due to optimised insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.

Ideal cable: Belden 1505A

Coloured boots may be substituted at the time of assembly for easy cable identification and can be ordered separately.

Key Benefits:
• Optimised contact pin and insulator design for UHD-data transmissions
• Proven rearTWIST technology
• Swiss antraloy plating
• Fully compatible with conventional BNC chassis connectors
• Improved return loss values at high frequencies

Connection type: BNC 75 Ω
Gender: male

Electrical
Contact resistance: ≤ 3 mΩ (inner)
Contact resistance: ≤ 2 mΩ (outer)
Dielectric strength: 1.5 kVdc
Impedance: 75 Ω
Insulation resistance: > 5 GΩ
Rated voltage: <50 V
VSWR: ≤1.06 / >30 dB up to 6 GHz
            ≤1.13 / >24 dB up to 12 GHz
            ≤1.22 / >20 dB up to 18 GHz

Environmental
Temperature range: -30 °C to +85 °C
Contact crimpability: Complies with IEC 60803 and IEC 60352-2

Mechanical
Cable O.D.: 6.3 mm
Cable retention: > 30 N (Center)
Crimp size: 6.47 Hex crimp (shield) 1.07 crimp (pin)
Insertion force: < 25 N
Lifetime: > 1000 mating cycles
Locking device: Bayonett
Cable anchoring: Jacket crimping
Material Contacts: Brass: (CuZn35Pb2), 0.2 µm AuCo (center contact)
Insert: PP
Shell: Brass (CuZn39Pb3)
Shell plating: Antraloy