Sales line+44 (0)1844 202101
Lines open Mon-Fri 9am-5pm

Neutrik NC3FXX-B - XLR

  • Neutrik NC3FXX-B - XLR
    Neutrik NC3FXX-B - XLR
Neutrik NC3FXX-B - XLR
PN - DA-73-5013
£4.88(ex vat) / Each
Qty Price
1-4£4.88 (ex vat)
5-9£4.42 (ex vat)
10+£4.21 (ex vat)

3 pole female cable connector with black metal housing and gold contacts. 

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well as cable strain relief.

Key Benefits:

  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Rugged zinc die-cast shell, long lasting and dependable • Internal thread on shell is well protected against any damage

Connection type: XLR
Gender: female

Electrical
Capacitance between contacts: ≤ 4 pF
Contact resistance: ≤ 3 mΩ
Dielectric strength: 1.5 kVdc
Insulation resistance: > 10 GΩ (initial)
Rated current per contact: 16 A
Rated voltage: <50 V

Environmental
Flammability: UL 94 V-0
Standard compliance: IEC 61076-2-103
Protection class: IP 40
Solderability: Complies with IEC 68-2-20
Temperature range: -30 °C to +80 °C

Mechanical
Cable O.D.: 3.5 - 8.0 mm
Insertion force: ≤ 20 N
Withdrawal force: ≤ 20 N
Lifetime: > 1000 mating cycles
Wiresize: max. 2.5 mm²
Wiresize: max. 14 AWG
Wiring: Solder contacts
Locking device: Latch lock

Material
Boot: Polyurethan
Contact plating: 0.2 µm Au hard alloy over 2 µm Ni
Contacts: Bronze (CuSn8)
Insert: Polyamide (PA66)
Locking element: Zinc die-cast (ZnAl4Cu1) / Ck 67 (spring)
Shell: Zinc die-cast (ZnAl4Cu1)
Shell plating: Black chromium
Strain relief: Polyacetal (POM)