Percon AK 14015AL LSOH Quad Black
-
Percon AK 14015AL LSOH Quad Black
The Percon AK 14015AL is composed of 1 Quad. It cancels electromagnetical induced noise from SCR dimmer packs, florescent lighting ballast and AC power transformers. It is most commonly found in broadcast applications where it was originally employed because of its excellent SNR ratio capabilities. Specially over longer cable runs. The broadcasting industry still favours it today over many other microphone cable types, O.F.C. cable. Its new design enables you to have the cable ready in two easy steps: cut and solder (the aluminium shield adheres to the jacket when you unsheathe the cable and the drain wire remains braided). Cca,s1a,d0,a1 euroclass acc.to EN50575.
Available in 500m.
Conductor
- Cu O.F.C.
- 25 x 0.10mm ø (AWG 24)
- DIN 1787
Insulation
- PEX IEC 708
- ø 1.2mm
Quad Shield
- Drain wire 7x 0,20mm CuSn short step (17) +Aluminium Foil/Gr Tape (Al/Gr) 100%
- PE H199
Quad Jacket
- ø 5.10mm
- LSOH
Electrical Properties
- Nominal Impedance Ω: 91,8859
- Cap. between conductor & other shield @ 1Khz pF/m: 116,801
- Shield DC resistance Ω/Km: 91,6581
- Cap. between conductor to conductor @ 1Khz pF/m: 63,5904
- Conductor DC Resistance Ω/Km: 61,8924
- Conductor inductance @ 1Mhz µH/m: 1,1227
Cable Characteristics
- Weight (Kg/Km): 21
- Colours: Black
Attenuation
Freq (Mhz) dB/100m
348,259 -2,75
2712,935 -9,83
5125,871 -12,94
6814,925 -14,74
7538,806 -15,53
8745,274 -16,70
9469,154 -17,64
9951,741 -17,85